DHCP Fix permits you to stop nasty hackers from listening in on all your packets.
Windows is a very ‘open’ system; not open in the sense of Microsoft giving people access to proprietary information, but open in the sense that the system is very trusting of other systems. When your computer is at home, not talking to anyone else, then that’s fine; but once you’re on the big bad internet, some people like to make their computers lie to yours, and that’s just not right.
AnalogX DHCP Fix is just a simple program that closes a security hole in Windows 95/98/2000 that can make it possible for another computer to monitor every piece of information that comes and goes from it. The program will allow you to enable or disable the registry entry that closes this particular hole.
DHCP Fix is a FREE tool that basically eliminates a major problem that could allow hackers or other malicious software to listen in on the information that your computer is sending to your ISP for your Internet connection. This is the problem that a lot of people claim is the reason for AOL linking their computers to their Internet service, so that they can start snooping on everything that they do through their computer’s modem.
AOL Linking to your Internet Connection is Pure and Simplistic Hoax.
You can open your modem and even add your modem’s IP address to your firewall to help protect you from someone spying on you, but unfortunately your firewall can be disabled or opened easily through another means.
DHCP Fix solves this by disabling or enabling a security setting in the Windows registry that closes the doorway for someone to listen in on your information. This is the exact same security hole that AOL and other broadband service providers use to put spyware on their customers’ computers. This is a problem that can potentially allow someone on the same network as you to monitor all information that you send through your modem, and even penetrate your firewall. If this were to occur, it would be possible for a hacker or someone like AOL to steal the information that you are sending. So if you just want your system to be secure and your modem is protected against someone spying on you, then this program is for you.
Other Functions of DHCP Fix:
1. Start and Stop the Registry Sub Key for DHCP Fix:
If you do not like entering the information in the Registry Key manually and would like it to stay always on, just start and stop the sub-key like this;
:BOOL””, “/REG_DWORD”, “8”
Where Product Name is “DHCP Fix”.
Start it by just clicking the appropriate button in the toolbar or the panel. You can easily stop it by clicking the same button.
2. Setup Startup Process for DHCP Fix:
If you wish to start DHCP Fix automatically when Windows starts, just select the appropriate “Startup type” in the “Startup” tab on the “Options” panel. DHCP Fix will then be started upon reboot and will stay running.
On the “Settings” panel, you can disable the DHCP Fix on certain types of machines, you can specify that DHCP Fix should be started when Windows starts, you can disable the automatic Start/Stop function of DHCP Fix, and you can tell DHCP Fix to start and stop on the
Manages and protects your DHCP by turning on the internet security program that hides your IP address when transmitting data across the internet.
Controls the startup at boot time of the DHCP by uncheck the optional registry entry to setup the DHCP service, which disables the IP address hiding.
DHCP Fix Adjusts the registry, to make your IP address appear when trying to connect to the internet after a reboot.
Install DHCP Fix
This dhcp fix is an attachment to the AnalogX Explorer 1.0.
DHCP Fix works with the following versions:
Note: the program is not dependent on any particular version of windows, all versions are supported
Download the latest version here:
PHNOM PENH, Cambodia – A Phnom Penh court has sentenced a man to three years in prison with hard labor for repeatedly putting the lives of his neighbors at risk by illegally raising the rent.
The verdict on Friday was the latest in a series of prosecutions related to tenement-dwelling rentals, which is one of the capital’s most important land markets.
The three-person panel said in a ruling it was imposing the lesser sentence because the applicant had admitted guilt and cooperated with the police in locating the store owner.
They also said that a five-year suspended prison term had been imposed for a separate illegal rental case involving the same defendant.
The man had been seen consoling the owner of the store for a suspended five-year prison term in the second case, which found the man guilty of working on his own and for another owner in collusion with him.
But, on this occasion, he had admitted that he should not have been raising the rent and that his roommate had not been working with him.
The owner of the store where the offense occurred had been given a two-year suspended sentence, and his co-worker was being held in pre-trial detention.
The ruling was a victory for a group of tenants who had complained for months that the man was raising the rents, threatening them and using the illegal practice to drive them out.
They had repeatedly approached the courts, but their case had languished. It was revived only after the
DHCP Fix is the extremely simple and easy to use program that allows you to just double-click to disable or enable the security patch in the DHCP entry (there is more than one) that closes a security hole in the Windows 95/98/2000 DHCP service. There is no registry edits, no special DOS procedures and no other program to run. It is just a one-button-and-it’s-done thing!
DHCP Fix Requirements:
This is a simple Windows 95/98/2000 application that is based on the Free program, AnalogX. You only need to install AnalogX in order to run this program. You simply double-click on the AnalogX executable and then click on the DHCP entry on the left side of the screen. Or, simply copy AnalogX to a floppy or CD-ROM and give it a test run. It’s not a huge system, it’s just an easy program that will let you close a security hole in Windows 95/98/2000.
When the program asks you to select which drive, select the drive for your CD-ROM. Then it will start installing the system. You can safely close this dialog box and your Windows 95/98/2000 DHCP entry should then open up again.
If you don’t want to install AnalogX, you can instead just download the Zip file with the complete, uncompressed source code. You then unzip it to a directory, such as “C:\dhcpfix” (Create the folder if it doesn’t exist). Copy AnalogX to this directory. You can then double-click on AnalogX to test it.
Alternatively, to simply disable the DHCP entry that closes this security hole, you can first unzip the enclosed zip file to a directory, like “c:\dhcpfix”, then navigate to this directory and double-click on the “dhcpfix.bat” file. If you want to enable the DHCP entry that closes the security hole, simply open up the “dhcpfix.bat” file and change the line, “DHCPFIX@%1 /S /V /D %2” to “DHCPFIX@%1 /S /E /V /D %2”.
In the case that DHCP Fix says that it cannot open the “dhcpfix.bat” file, then you will need to open up Internet Explorer, navigate to the AnalogX site, then click on Download, Follow Link, Custom file, “.bat file”. It is suggested that you
This is a game changer. It does away with the problems that occur when attempting to “Hide” or disable a “Remote Desktop Connection Service” or “RDP Service” or something of the sort. This program allows you to hide or disable this service so that hackers will not be able to spy on what you are doing.
DHCP Fix Requirements:
You must have access to your “C:\Windows\System32\rundll32.exe” and not your “C:\Windows\System32\rundll32.exe” (look at the “Accessible” check box in the “Advanced” properties and click “Edit…”).
DHCP Fix Features:
Stops keyloggers, keystroke loggers, monitoring software, and live statistics
Hope you have a nice day and many more to come!
Friday, January 21, 2009
Hi all, please check out my new Genesis emulator.. Will be adding more titles to it soon…
Genesis Genesis emulator is a free software program that allows you to run all your favorite Genesis games right on your PC.
It was originally designed to run the popular game series Mega Drive and Genesis, however there are many more titles available.
Please note that this emulator is still in development, and some games do not work.
The in-game graphics are designed to offer the most realistic experience possible. We will try our best to get it to run on all graphics cards and computers.
Other games do not work because Genesis emulator is not very popular, and the developers don’t receive any money (and probably don’t like that) for games.
Genesis really is a much older console.
The environment has been designed to be as fun as possible. It simulates the environment in which the game was originally created.
We try to capture the experience of playing on those original consoles, and all 16-bit games run without any additional effort.
Genesis emulator is built using the Libretro platform, which allows you to play hundreds of Nintendo, Sega and more games without the need of an original console.
The sound track is mapped to match the original and you can enjoy the game as if you were playing it back then.
Many GamesMakes any other emulator obsolete (in theory)
Easy to useThe
Supported Graphics Cards:
Windows 7 or Windows 8
Windows 7 or Windows 8 Processor:
1.8 GHz Core 2 Duo or equivalent
1.8 GHz Core 2 Duo or equivalent Memory:
2 GB RAM
2 GB RAM Graphics:
GeForce 8600 GTS or GeForce GTX 970 or Radeon HD 5700 or equivalent
GeForce 8600 GTS or GeForce GTX 970 or Radeon HD 5700 or equivalent DirectX:
Version 11 Hard Drive:
2 GB available space
2 GB available